Description
The PRO V2 SHP was designed specifically for the Tippmann markers running RT and Cyclone Feed as well as Automags running RT. This regulator ships at 1100psi, deal for increasing your rate of fire on your Automag to 20+ balls per second, unleashing the full potential of your Automag. You have the ability to remove 3 shims inside of the regulator to drop the pressure down to 950psi, which we found to be ideal on Tippmanns that are starving for air when using the RT and Cyclone Feed upgrades. Ninja recommends using Steel Braided line with the PRO V2 SHP.
- New Ball Valve Seal
- 30% Increased Flow
- Improved Seal Integrity
- Rotational 360 Degree
- Made in USA
